Okay so i will be dropping the A9 into the shuttle shortly after Japfest and last bits i have to buy are the drive shafts.
My question is are the D16A9 Drive Shafts compatible with the standard hubs or am i going to have to change my hubs as well???
d16a9 In to 91 D14 Shuttle
-
- Learner - Newbie
- Posts: 40
- Joined: Sun Jul 22, 2012 10:08 pm
Re: d16a9 In to 91 D14 Shuttle
The shafts will fit.
Most D series suspension/gearbox stuff is interchangeable.
Most D series suspension/gearbox stuff is interchangeable.
2000 CRV Camel Trophy Edition
2009 Kia Pro Ceed 3 1.6 crdi
2009 Kia Pro Ceed 3 1.6 crdi
Re: d16a9 In to 91 D14 Shuttle
Yes they will fit. Only slim chance is dust caps covering the bearings on the inside of the hubs.
Which are easily removed. If you tighten a shaft up and it's hard to turn, then you know you need to remove them.
Which are easily removed. If you tighten a shaft up and it's hard to turn, then you know you need to remove them.